test report report no.: JC-BW140625-1 attention: please note that every statement made in this report is only valid for the samples tested and reported herein. this report shall not be reproduced except in full, without th e written approval of skyte. page 1 of 3 date: aug.27, 2014 applicant name: taiwan shike electronic holdings limited applicant add.: tin fung road, science city, guangzhou high-tech development zone report on the submitted sample(s) said to be: sample name: model/style: sod-523, sod-323, sod-123, sod-723, sod-923, ll-34, sod-882, sod-123fl, sod-323fl, sot-323 sot-23 sample receiving date: aug.21, 2014 testing period: aug.21, 2014 to aug.26, 2014 tests conducted: as requested by the applicant, for details refer to attached page(s). ************************************************************************************************************ tests conducted: as requested by client, according to substances of very high concern (svhc) in the candidate list and the public consu ltation list published by european chemicals agency (echa), which are defined in article 57 of regulation (ec) no. 1907/2 006 (reach regulation), svhc screening is performed. summary: svhc substances : 4 items in the candidate list , see test result for details svhc published date : jun.16, 2014 result summary: according to specified test processes in this report, 4 substances of svhc are less than 0.1%, w/w in submitted sample, see test result for details. ************************************************************************************************************ signed for and on behalf of skyte testing services shenzhen co., ltd. david tu / general manager
test report report no.: JC-BW140625-1 attention: please note that every statement made in this report is only valid for the samples tested and reported herein. this report shall not be reproduced except in full, without th e written approval of skyte. page 2 of 3 test result no. test item cas no. ec no. component no. & test result (%,w/w) mdl (%,w/w) 1/2 * 1 cadmium chloride # 10108-64-2 233-296-7 n.d. 0.01 2 sodium peroxometaborate # 7632-04-4 231-556-4 n.d. 0.01 3 sodium perborate; perboric acid, sodium salt # 239-172-9, 24-390-0 n.d. 0.05 4 1,2-benzenedicarboxylic acid, dihexyl ester, branched and linear 68515-50-4 271-093-5 n.d. 0.01 tested by: dengpeng, xishijin checked by: zhouxiaoyun, jiangnengqiang test component description: 1. silver color metal 2. black plastic remark: (1) n.d. = not detected, less than mdl (2) mdl = method detection limit (3) %, w/w = percentage of weight by weight (4) * = as per the applicant's reques t, the mixed test was conducted. (5) # = the substances are calculated by the test results of element (e.g. co,as,cr 6+ ,pb,al,zr,mo,b) respectively, identity of above metal substances present in the article has to be further confirmed. (6) the chemical analysis of svhc is performed by means of currently available analytical techniques against the list published by echa. the list is under evaluation by echa and may subject to change in th e future. please refer to http://echa.europa.eu/candidate-list-table (7) in accordance with regulation (ec) no 1907/2006,any producer or importer of articles shall notify echa, in accordance with paragraph 4 of article 7, if a substance meets the criteria in article 57 and is identified in accordance with article 59 (1) o f the regulation, if (a) the substance is presen t in those articles in quantities totaling over one tonne per producer or importer pe r year; and (b) the substance is present in those articles a bove a concentration of 0.1% weight by weight (w/w). (8) article 33 of regulation (ec) no 1907/2006 requires supplier of an article containing a substa nce meeting the criteria in article 57 and identified in accordance with article 59 (1) in a concentration above 0.1% weight by weight (w/w) shall provide the recipient of the article with su fficient information, available to the supplier, to allow safe use of the article including, as a minimum, the name of that substance. (9) if a svhc is found over the reporting limit, applicant is suggested to identify the component which contains the svhc and the exact concentration of the svhc by requesting further quantitative analys is from the laboratory. (10) test results in this report are based on the tested sample. this report refers to testing result of tested sample submitted as homogenous material(s). in case su ch material is being used to compose an article, the results indicated in this report may not represent svhc concentration in such article. if this report refe rs to testing result of compos ite material group by equal weig ht proportion, the material in each composite test group may come from mo re than one article.
test report report no.: JC-BW140625-1 attention: please note that every statement made in this report is only valid for the samples tested and reported herein. this report shall not be reproduced except in full, without th e written approval of skyte. page 3 of 3 test method no. test item test method and instrument 1 cadmium chloride us epa 3052-1996/us epa 3050b-1996/ us epa 6010c-2007, icp-oes 2 sodium peroxometaborate us epa 3052-1996/us epa 3050b-1996/ us epa 6010c-2007, icp-oes 3 sodium perborate; perboric acid, sodium salt us epa 3052-1996/us epa 3050b-1996/ us epa 6010c-2007, icp-oes 4 1,2-benzenedicarboxylic acid, dihexyl ester, branched and linear en 14372-2004, gc-ms measurement flowchart sample photo JC-BW140625-1 (end of report) attention is drawn to the terms and conditions printed overleaf sample cutting sample weighing sample pretreatment content determination data analysis and review
|
